Explained: the difference between clinchers, tubulars and tubeless tyres
We explain what the differences between clinchers, tubulars and tubeless tyres are, and what their pros and cons
Heard of clinchers, tubulars and road tubeless tyres, but unclear about the differences between them, and what each is good for? Matt Brett, a former Editor of 220 Triathlon, explains all…
What are clincher tyres and wheels?
Clinchers tyres are what the vast majority of us use these days: tyres with beads around the edge that hook into the rim of a clincher wheel, with entirely separate inner tubes that you can repair or replace if you puncture. Many clincher wheelsets also offer a tubeless ready construction so you swap to tubular.
What are tubulars?
A tubular – or tub – is a tyre with an inner tube stitched inside. The tubular is glued to a specially designed rim, or sometimes stuck there with double-sided tape. If you puncture a tubular, you can often repair it with a Latex-based liquid sealant. Otherwise, you have to take the tubular off the rim, open up the backing, patch the tube, sew it up and stick it back on. It’s a faff, to be blunt.
The combined weight of a tubular wheel and tyre is usually lighter than the equivalent clincher, so the wheel can accelerate a little faster. Plus, you’re very unlikely to get pinch flats with a tub, you can generally use higher tyre pressures, and if you do puncture the tyre is very unlikely to come off the rim. On the downside, the lack of convenience if you puncture means that most people only use tubs only for racing.
Road tubeless is a relatively recent innovation that uses an airtight rim and tyre without an inner tube. You need specific road tubeless tyres and in most cases road tubeless wheels, although you can switch 700c clincher rims to tubeless use with a conversion kit.
You can run road tubeless tyres at lower pressures than most clinchers without the danger of a pinch flat. You’ll also save a little weight over standard clinchers, but the tyres are generally heavier, and you’ll really need to use a sealant to help the tyre seal on the rim and prevent punctures.
Road tubeless tyre choice is still limited and fitting can take quite a lot of patience, but it seems likely that more wheels and tyres are on the way. Maybe this will be the year that road tubeless really takes hold.
Like this article? Check out our guide to 10 of the best race wheels currently available