Triathlon bikes buyer’s guide 2015
Gear > Bike > Time Trial/Triathlon bikes

Triathlon bikes buyer’s guide

They may be heavier than road bikes, but a tri-specific steed can give you both extra speed and comfort during the second discipline

We have two Americans to thank for the triathlon bike: Dan Empfield and Ray Browning. Empfield founded Quintana Roo in 1987 to build wetsuits specifically for triathletes. That same year the Scott DH aerobar began appearing on bikes at triathlons.

The best triathlon bikes reviewed


But although the DH bar offered an aerodynamic advantage, it came at a cost, as the Quintana Roo company history explains: “The problem was that it wasn’t very comfortable; the slack seat-tube angle and the fixed quill stems of the bikes of this time meant there was little room for adjustment. To achieve a good aero position, riders were bending over almost completely double.”

Empfield noticed that athletes using the DH bars would move their saddles forwards to get more comfortable and this got him thinking about altering the typical road bike frame geometry with its 73–78° seat-tube angle. 

Meanwhile Browning, a successful triathlete studying for a PhD in biomechanics at UCLA, had found that riders could pedal harder by bringing their hips forwards to effectively steepen the seat-tube angle. He also believed that the more open hip angle such a position created would allow riders to run better after riding. 

Instant success

Empfield and Browning joined forces to put their theories to the test. Empfield built the QR Superform, with 650c wheels, aerobars and, more importantly, an 80° seat tube. Browning rode it at 1989’s Ironman New Zealand to see if this ‘tri-specific’ geometry worked. It did. He finished the bike leg 30mins ahead of two-time Ironman World Champion Scott Tinley and went on to win, breaking the course record in the process. 

Thanks to advances in materials, design methods and our understanding of low-speed aerodynamics, triathlon bikes have continued to be refined since that initial outing in 1989. But, as Carl Matson, design engineer at Trek points out, their purpose remains the same: “Getting you to T2 as fast as possible while preserving your ability to run.”

Triathlon bike from the front

Time then to look at today’s innovations and just whether you need to be adopting the aero tuck this summer… 

The traits of a triathlon bike

Certain characteristics are found on every tri bike, no matter what maker’s name appears on the frame…


Aerobars put you in a more aerodynamic riding position than conventional handlebars. While a road bike’s ‘drop’ bars may allow you to lower your head and flatten your back, aerobars also enable you to tuck your arms and elbows in. In this sort of aero tuck position you present a smaller, narrower profile to the air you’re trying to push out of the way. 


Without being bogged down by the UCI rules governing tube dimensions that road race and time trial frames must adhere to, tri-specific bikes are free to use almost any size and shape of tube they like.

Felt IA triathlon bike

Hence the broader down tubes and head tubes with long trailing edges seen on the likes of the Felt IA and Specialized Shiv. More radical designs do away with certain tubes altogether, such as the seat tube-less Kestrel Airfoil Pro and Softride bikes, and, more recently, Quintana Roo’s Illicito that only uses a seatstay on the driveside. 

Seat-tube angle

The hallmark of a triathlon bike is a steep seat- tube angle. Whereas road bike seat tubes tend to sit on a spectrum between 72° and 75°, the seat tubes on tri bikes typically start at 75° and can go up beyond 80°.

The steeper angle moves the rider further forward, making it easier to ride in a tuck position on the aerobars, and opens their hip angle, allowing athletes to pedal harder.


Given that both their bike and bars put triathletes in a different riding position to other types of cyclists, the next logical component to consider tailoring to their needs is the saddle.

Triathlon bike saddle

To that end, more stub-nosed, grooved and pronged saddles are appearing on tri-specific bikes to eliminate or at least minimise the discomfort that riding in a low-profile tuck can cause.

The various designs are intended to relieve pressure on the rider’s perineum by supporting their weight on their ischial tuberosities (sit bones) instead.


Getting through a long-distance bike leg means carrying fuel, tools and spares, so storage is a concern on a tri-specific bike. Stuffed jersey pockets and a pair of bottle cage mounts will do the job, but there are better ways to solve the problem. 

Drinking systems mounted between the aerobars or, better still, integrated into the frame (such as Specialized’s Fuelselage), provide convenient, aerodynamic options, while carefully shaped containers such as the top-tube box seen on the Scott Plasma or the Draft Box mounted behind the seat tube on Trek’s Speed Concept provide places for tubes, tools and food. 


Despite the presence of levers, it can often appear as though triathlon bikes don’t have any brake callipers. Aerodynamics is the reason for their apparent invisibility as bike designers look for ways to keep them out of the airflow.

Front brakes on a triathlon bike

Hiding the front brake behind the fork or integrating it into the fork’s structure is a popular solution, as is mounting the rear brake behind the bottom bracket, underneath the chainstays.

Read on to find out what the future holds for triathlon bikes (2/2)


Daily deals from top retailers

We'd love you to add a comment! Please login or take half a minute to register as a free member

Back to the top